Single Door 450S
Door Weight 120 KGM
Door Width 800-1800mm
Aluminum Box Width 1600-6300mm
Door Open Speed 200-500mm/sec , Adjustible
Door Close Speed 200-400mm/sec, Adjustible
Door Open Time Interval The door will be closed within 1~9 seconds after opened in the stable state, adjustable.
Control Panel 8-bits Micro-controller based system.
Motor Brushleww DC Mortor, 24V dc, 45 Watt
Power Consumption 55 watt 100~260 Vac
Power Input AC 110/220V 50/60 Hz
Operating Procedure AC -> ON -> Open door in slow speed (detected by CPU) Slow speed to halt (door open state)

Door close action -> Quick to close door -> Braking -> Moving in slow speed -> Moving -> Keep in close( Door in closed state )

The driving device of Brushless DC Motor performs the feature as follows:

1. Optical rule for distance measuring.
2. Stable rotating torque.
3. Stable rotating speed.
4. Heavy duty.
5. High efficiency without thermal problem.
6. High starting torque increasing open or close speed.
7. Easy to get through the door.
8. With overload protecting device to prevent sliding formard inadvance.

Driving Pulley:

The Driving Terminal of Guiding Belt is used to adjust the tension of the belt, and the Driving pulley base adopts vertical stand fixed with under the aluminum box to prevent door shaking aused by belt.

complete set for single automatic door.

Single Door 450T
Door Weight 90 KGM
Door Width 800-1800mm
Aluminum Box Width 3200-6300mm
Door Open Speed 200-500mm/sec , Adjustible
Door Close Speed 200-400mm/sec, Adjustible
Door Open Time Interval The door will be closed within 1~9 seconds after opened in the stable state, adjustable.
Control Panel 8-bits Micro-controller based system.
Motor Brushleww DC Mortor, 24V dc, 45 Watt
Power Consumption 55 watt 100~260 Vac
Power Input AC 110/220V 50/60 Hz
Operating Procedure AC -> ON -> Open door in slow speed (detected by CPU) Slow speed to halt (door open state)

Door close action -> Quick to close door -> Braking -> Moving in slow speed -> Moving -> Keep in close( Door in closed state )

complete set for twin automatic door

model DV5

DV5 is a safety thru-beam sensor designed for automatic door control, and is similarly suited for other applications where a narrow field of detection is required. Each set consists of a controller , equipped with one (DV5100) or two (DV5200) pair of emitter/ detector sensor. Tested to ANSI 156.10, EN12445.

model SG8500

SG8500 is a microwave contactless sensor-switch with two modes of operation. In ‘Sense’ mode, when motion is detected, an output relay activates the device that SG8500 is connected to. In ‘Switch’ mode, the output relay will toggle “ON” or “OFF” on the device.

Without the need for physical contact, the SG8500 promotes safety and hygiene. It is especially useful for use clean room environment such as hospitals, food processing and handling, pharmaceutical, bio-chemicals and bio-medical industry.

AgilSense Contactless Switch is not affected by any environment factors, (i.e. lighting, temperature or sound) which are typical of conventional contactless switch. It is activated by directional motion towards the switch panel.

SG8500 is also especially advantageous to the people with disabilities, as it offers convenience and comfort by facilitating access to daily apparatus.

model KF 100

KF KLASSIC Series is another innovative Bi-directional high frequency Motion Detector for automatic door activation. They are simple to install and manufactured using AgilSense most popular X-band antenna modules

model ATD360

The microwave motion sensor is installed at an automatic door and senses the motion of a man or an obiect to open and close the automatic door. power supply AC12-24V/DC12-30V, Contact capacity 24V/1A ,power consumption 2W Max , Frequency -24.125GHZ, Max installation height 3.5 M ,Max sensing distance 4m(W)x2m(D)(based on 2.2m of installation height)

model ATD-10SB

The safety sensor opens and closes agin an automatic door if there is an object that is sensed in an instant when it is operated. power dc12V-40V/AC10V-30V size 44x114x30mm weight 58g (Excluding the battery) contact capacity 0.5A/125Vac,2A/30VDC Photo Transmitter / Receiver :10M(33ft )

model ATD4501

The proximity sensor is to open and close an automatic door when a hand is close to the front. power DC12V-40V+-10% ,AC10V-AC30V+-10% weight 49 g power consumption quiescent current 10mA / orking current 30mA sensing distance Adjustable by the user within 45 cm size 39LX 121W X19H MM , Contact capacity .5A/125VAC , 2A/ 30VDC

model ATD1 / 2 / 3

This automatic door switch is installed at the entrance and in the inside of a toilet for the physically challenged to automatically open and close the door. 253g-controller ,212g-internal operation switch ,217 external operation switch ,size 56x171x41 mm( controller ) ,150x170x18 mm(switch) ,power 2A/24vdc ,2A/120vac

model ATD5 / ATD3

ATD5 wireless switch ,power supply -lithium battery(3v cr2450)2ea ,Frequency-447.600MHz ,Modulation-FM(FSK NRZ) size-34LX179WX11H mm ,weight 58g(excluding the battery)

ATD3 recevier ,power supply- AC220v+-10% 60Hz DC12V-30V/AC12V-24V, contact capacity-.5A/120VAC ,2A/30VDC , sensitivity -100dBm , size 56Lx171Wx41H mm , weight 251g